Publicité
Les langues disponibles
Les langues disponibles
4. Open the cover of the HEPA filter
7. Clean the dust container with a
cloth or brush. Do not put it in the
9. Replace the pre-filter and the HEPA filter in the dust
container
Notes:
- Before installing the filters, make sure that the HEPA filter
and the pre-filter are completely dry.
To clean the main brush, follow the instructions below :
1. Open the passenger compartment
the main brush
To clean the side brushes, run them under water or clean them with a cloth
EN
5. Remove the pre-filter and
the robot's HEPA filter.
water.
2. Remove the main brush
6. Gently clean the HEPA filter and
8. Let the various elements
dry before reinserting
them.
- Do not expose the filters to the sun.
10. Close the dust bin cover and install the dust bin in
the robot.
Please note: the dust container and the HEPA filter must
not be washed with water.
3. Use the cleaning brush to remove dirt.
the pre-filter with water.
Publicité
