Sony MFD-40UC Mode D'emploi page 11

Installation
Installing the
Windows XP
Device Driver
Windows XP does not require a device
driver to use the drive because the
device driver is already installed. It is
automatically found when you connect
the drive to your computer.
Installing the
Windows Me
Device Driver
This section explains how to install the
drive device driver on a system running
Windows Me.
To install the device driver
1
Insert USB Floppy Disk Drive
Device Driver CD-ROM into the
CD-ROM drive of your
computer.
2
Connect the USB connector of
the drive to the USB port of
your computer.
The Add New Hardware wizard starts and
the following dialog box appears.
3
Select "Specify the location of
the driver (Advanced)", and
then click [Next].
The following dialog box appears.
4
Select the "Specify a location"
check box and type
"X:\Win2000.ME" (where X is
your CD-ROM drive letter) in
the box.
Note
Make sure that all the other check boxes
are clear.
Continued
GB
11