Publicité
Les langues disponibles
Les langues disponibles
14. CARE (
CONT
Avoid when choosing a detergent:
- Any cleaners that contain bleach will attack stainless steel.
- Any products containing: chloride, fluoride, iodide, bromide will deteriorate surfaces rapidly.
- Any combustible products used for cleaning such as acetone, alcohol, ether, benzol, etc., are
highly explosive and should never be used close to a range.
15. OPERATION
BLOWER
The blower is operated using 2 controls.
Use the on/off rocker switch (2) to start and stop the
blower. When turned ON, the switch turns red and the
blower operates at the speed set by the speed control
knob (1).
Turn the speed control knob clockwise to increase
blower speed – counterclockwise to decrease speed.
COOKTOP LIGHTING (HALOGEN)
Use the on/off rocker switch (3) to turn the halogen
lights ON or OFF.
HEAT SENTRY™
This hood is equipped with a Heat Sentry thermostat.
This thermostat is a device that will turn on the blower if it senses excessive heat above the cooking
surface.
1) If blower is OFF - it turns blower ON to the last selected speed.
2) If blower is already ON speed will remain the same.
The HEAT SENTRY can start the blower during a range top fire or other excessive
heat situations even if the hood is turned off. In this case, it is impossible to turn
the blower OFF using control panel switch. To stop the blower, set the main power
switch located behind the baffle filters in OFF position, if it is possible to do safely.
When the temperature level drops to normal, the blower will return to its original setting.
M
AIN POWER
SWITCH
HD0467
'
)
D
1
HC0058
1) B
LOWER SPEED CONTROL KNOB
2) ON/OFF
3) H
ALOGEN LIGHT SWITCH
WARNING
!
10
2
3
BLOWER SWITCH
Publicité
