Télécharger Imprimer la page

Linea 2000 DOMO DO2430 Mode D'emploi page 58

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
DO2430
TURNTABLE INSTALLATION
1. First place the turntable ring in the middle of the
microwave oven.
2. Place the turntable on the ring. Make sure that the
middle of the turntable fits into the turntable shaft.
CAUTION:
Never place the glass tray upside down. The glass tray should never be restricted.
Both glass tray and turntable ring assembly must always be used during cooking.
All food and containers should be placed onto the glass turntable during cooking
at all times.
If the glass tray or turntable ring assembly cracks or breaks, contact your nearest
authorized service center. Or you can order the accessories in our webshop:
webshop.domo-elektro.be
INSTALLATION
Remove all packaging material and
accessories.
Check the oven for any damage,
such as dents or a damaged
door. Do not use the oven if it is
damaged. Remove the protective
film around the machine, this is
applied to avoid scratches.
1. Choose a place to install the
microwave, where there is sufficient open space for the air intake and exhaust.
The microwave oven must stand at least 85 cm high.
Make sure that the left, right and back side are at least 20 cm from the wall or
cupboard. One side of the microwave oven must be completely exposed. The
open space above the microwave must be at least 30 cm.
2. Place the oven as far as possible away from radio and TV, because the oven may
cause reception problems.
3. The microwave must be placed in a dry environment, away from heat and
humidity, for example gasburners and watertanks.
4. Blocking the air intake and exhaust opening can lead to damage.
5. Make sure that the timer knob is set to 0 so that the microwave oven is turned
off and plug the plug of your oven into the wall outlet. Be sure to check that
the voltage at home is consistent with the voltage indicated on the label on the
appliance.
58

Publicité

loading