Franke FDF H45 12354 XS LED0 Mode D'emploi Et Installation page 10

USE
Button Led
T1 -
Fixed
T2
Fixed
T3
The Led
corresponding to
the speed that has
been set flashes
once every
second.
Fixed
T4
Flashes twice a
second.
L -
EN
Control panel
Function
Turns the Motor off.
Turns the Motor on at Speed one.
Turns the Motor on at Speed two.
Turns the Delay Function on and off when pressed and held for 2
seconds.
Activates automatic switch-off (Motor+Lights) with a 30' delay. Suitable
to complete elimination of residual odours. Can be activated from any
position when the Intensive function is disabled, and is deactivated by
pressing the button or turning the motor off.
Turns the Motor on at Speed Three.
Turns the Intensive function on and off.
This speed is timed to run for 6 minutes. At the end of this time, the
system returns automatically to the speed that was set before. It is
disabled by pressing the button or turning the motor off. It cannot be
activated when the Delay function is active.
Turns the Lighting System on and off at maximum intensity.
1
10
0