Télécharger Imprimer la page

Beko DC 1169 Mode D'emploi page 31

Publicité

Les langues disponibles

Les langues disponibles

For the condenser (products with a
condenser)
Hot and humid air in the condenser is cooled with
the cold air from the room. Thus, the humid air
circulating in your dryer is condensed and then
pumped into the tank.
C
Clean the condenser after every 30 drying
cycles or once a month.
To clean the condenser:
1. If a drying process has been carried out,
open the door of the product and wait until
it cools down.
2. Unlock the 4 condenser locks after opening
the kick plate.
3. Pull out the condenser.
4. Clean the condenser with pressurized water
and wait until the water drains.
5. Replace the condenser with the side of it
labelled with "Top" facing upwards. Lock
the 4 condenser locks. Make sure that
the red lock on the upper right corner is
engaged securely.
6. Close the kick plate cover.
Close properly and
check the locking
latchs?
31 EN

Publicité

loading