Carson Expert Charger Duo 2.0 Manuel D'instructions page 11

SAFETY PRECAUTIONS
Please follow below safety notes otherwise the charger and the
battery can be damaged violently.
• Do not keep it in an environment below 5°C or above 50°C.
• Keep away the charger from dust, damp, rain, heat, direct suns-
hine and vibration. Do not drop it.
• This charger should be used on a heatresistant, nonflammable
and nonconductive surface. Never place it on a car seat, carpet
or similar.
• Do not apply the voltage & current higher than the require-
ments by the manufacturer of the battery.
SPECIFICATIONS
Input voltage charger: 11-18 V DC or 230 V AC
Charging current: 6 A maximum
Discharge current: 2 A maximum
Battery types: 1-6 cells Li-xx, 1-15 cells NiMh/ NiCd, Pb (2-24 V)
Balancer + XHP Adapter
Delta-Peak cut
Digital Mode: (Mains unit function 3-24 V)
EXTERNAL VIEW
Input
230 V
output port
balance port
TAKE NOTE Always start the charger before
connecting a battery. Otherwise, the battery
or charger could be damaged.
1. Connect the charger to a wall socket.
2. In the programming menu, set all the values as indicated in
these instructions.
• Double check if the battery count and type match your charger
settings.
• Never disassemble or alter the charger.
• Do not attempt to charge/discharge nonrechargeable batteries
or damaged batteries with the charger.
• Keep the charger far away from children. Never leave the char-
ger unsupervised, when it is connected to its power supply.
Charge/discharge: possible on both outputs at the same time
Balancer current: 400 mA
Charge power: 50 W max. on each output
Discharge power: 5W max. on each output
Weight: 950 g
Size: 175x150x65 mm
BATTERY CONNECTION
LCD screen
Input
11-18 V
button
3. Connect the charging cable.
4. Connect the battery correctly to the charger.(first connect the
main charging cable and then the balancer connection if this is
to be used)
5. Start charging.
Battery balancer
11 // GB