Publicité
Les langues disponibles
Les langues disponibles
ATTACH THE EXHAUST HOSE
The air conditioner requires being vented outside so that the exhaust air can escape the
room which coming from the appliance contains waste heat and moisture.
Do not replace or extend exhaust hose which will result in decreased efficiency, even
worse shut down the unit due to low backpressure.
Connect the hose connector to one
end of the exhaust hose.
Extend the adjustable window kit the
length of your window. Connect the
exhaust hose to the window kit.
Attach the hose connector to the
exhaust air outlet of unit.
2021-11-18 OCG BluMill Portable Air Conditioner V08056 Manual V03.indd 9
2021-11-18 OCG BluMill Portable Air Conditioner V08056 Manual V03.indd 9
Connect the windows kit adapter to
the other end of the exhaust hose.
Close your window to secure the kit
in place. It needs to hold the win-
dows kit firmly in place, secure the
window kit with duct tape if required.
It is recommended that the gap
between the adapter and the sides of
the window should be sealed off for
maximum efficiency.
Adjusting the length of the flexible
exhaust hose, and avoid bends in
the hose. Then place AC near an
electrical outlet.
Adjust the louver at the air outlet, and
then switch on the unit.
EN
9
29-11-2021 15:25
29-11-2021 15:25
Publicité
