Publicité
Les langues disponibles
Les langues disponibles
42 MAINTENANCE
12
To remove the antifreeze from the washer
after storage, run the Rinse+Spin cycle using
detergent.
• Do not add laundry to this cycle.
When the Water Inlet Hoses Are
Frozen
1
Turn off the washer, and unplug the power
cord.
2
Turn off the faucets connected to the water
inlet hoses.
3
Pour hot water on the frozen faucets to thaw
the water inlet hoses and remove the water
inlet hoses.
4
Immerse the water inlet hoses in hot water to
thaw them.
5
Reconnect the water inlet hoses to the water
inlets of the washer and to the faucets.
• See Connecting the Water Inlet Hoses for
details.
6
Turn on the faucets.
7
Press the Power button to turn on the
washer.
8
Press the Spin button to operate spin only
cycle for draining and spinning.
9
Press the Start/Pause button.
When the Drain Hose is Frozen
1
Pour hot water in the washer drum and close
the door.
2
Wait for 1 - 2 hours.
3
Press the Power button.
4
Press the Spin button to operate spin only
cycle for draining and spinning.
5
Press the Start/Pause button to make sure
the water drains.
Publicité
