CLEANING
WATER DISPENSER
Grille -
Wipe with a wet cloth, and dry with a dry cloth.
Filling the Water Tank
1. Filling with Water
It is not necessary to remove the water tank to ll it. Open
the cover cap on the tank and pour the water in as shown.
NOTE
- To prevent spills, make sure to close the cover cap before
closing the refrigerator door.
- Do not ll the water tank with liquids containing sugar or with
carbonated drinks.
2. Disassembly
Grip the tank from the side and bottom and lift it to remove it.
NOTE
Make sure the water tank is empty before disassembling it.
3. Assembly
To reassemble the water tank, insert the valve assembly in the
opening on the door as shown. Once the valve assembly is in
place, push the tank down until it is properly aligned.
Cleaning the Water Tank
1. Remove the tank cover.
2. Clean the inside and outside of the water tank
with a mild detergent and rinse thoroughly
under running water. Dry the water tank with
a soft cloth.
(OPTIONAL)
fig. 1
fig. 2
fig. 3
fig. 4
3. Clean the inside and outside of the cap w ith
a mild detergent and rinse thoroughly under
running water. Dry the cap with a soft cloth.
1. Use lukewarm water when cleaning.
2. Do not put anything other than water in
the dispenser tank. If you use it with soft
drinks, put water in the tank and quickly
dispense 3 or 4 cups of water to clean
out the dispenser.
15
Cover Cap
Caution