Publicité
Les langues disponibles
Les langues disponibles
Auto Open
After washing, the door will open automatically to achieve better drying effect.
NOTE
The dishwasher door must not be blocked when set to
open automatically.
This can disrupt door lock functionality.
ERROR CODES
If there is a malfunction the dishwasher will display an error code.
The following table shows possible error codes and their causes.
Codes
Meanings
Longer inlet time.
E1
Not reaching required
E3
temperature.
E4
Overflow.
Failure of orientation
E8
of distributary valve.
Washing control system
Ec
fail.
Failure of communication
Ed
between main
with display
WARNING
• If overflow occurs, turn off the main water supply before calling a service.
• If there is water in the base pan because of an overfill or small leak, the
water should be removed before restarting the dishwasher.
• If there is an error code that cannot be solved, please request professional
assistance.
Possible Causes
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
Malfunction of heating element .
Some element of dishwasher leaks .
Open circuit or break of distributary valve.
PCB or motor fail.
Open circuit or break wiring for the
circuit board
communication.
circuit board .
- 4
2-
Publicité
