EarthWise SN74018 Manuel De L'opérateur page 7

INSTALLING UPPER HANDLE

Align the holes on the upper handle with the holes in
the center handle as shown. (See Fig 6)

Insert threaded end of J bolt through both handles with
the threaded end facing inside.

Install the handle knob and tighten secure.

Repeat on the opposite side.

Secure the cable clip to handles. (See Fig 7).
Fig. 6
ASSEMBLY
INSTALLING CHUTE CRANK

Install the upper chute crank through the bracket
located on the center handle. (See Fig 8)

Align the holes in the upper and lower cranks and
insert the cotter pin through the holes as shown to
secure. (See Fig 9 and Fig 10)

Turn the lever left and right to verify the proper
functioning of the crank and the chute.
Fig. 7
7
Fig. 8
Fig. 9
Fig. 10