mundoclima MUSTR-H11 Serie Manuel D'installation Et L'utilisauter page 71

Press the MODE button to select FAN mode.
1.
2. Press FAN button to select the fan speed
in a range of AU-100%.
Press the ON/OFF button to start the unit.
3.
NOTE: You can't set temperature in FAN mode.
As a result, your remote control's LCD screen
will not display temperature.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP
or TEMP button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED cannot be changed in DRY
mode.
1. Press the MODE button to select HEAT
mode.
2.
Set your desired temperature using the
TEMP or TEMP
3. Press FAN button to select the fan speed
in a range of AU-100%.
Press the ON/OFF button to start the unit.
4.
NOTE: As outdoor temperature drops, the
performance of your unit's HEAT function may
be affected. In such instances, we recommend
using this air conditioner in conjunction with
other heating appliances.
71
button.