mundoclima MUSTR-H11 Serie Manuel D'installation Et L'utilisauter page 70

ATTENTION! Before operation, please
ensure the unit is plugged in and power
is available.
1. Press the MODE button to select COOL
mode.
2.
Set your desired temperature using the
TEMP or TEMP
3. Press FAN button to select the fan speed
in a range of AU-100%.
Press the ON/OFF button to start the unit.
4.
The operating temperature range for units
is 16-30°C (60-86°F).
You can increase or decrease the set
temperature in 1°C (1°F) increments.
In AUTO mode, the unit will automatically select
the COOL, FAN, HEAT or DRY function based on
the set temperature.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can't be set in AUTO mode.
button.
70
or TEMP button.