Télécharger Imprimer la page

Beko HBS6702 Manuel D'utilisation page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
3
Operation
3.1 Preparation
1. Remove all packaging and sticker materials
and dispose of them according to the
applicable legal regulations.
2. Before using the appliance for the first time,
clean parts which come into contact with food
(see the "Cleaning and care" section).
3. Cut the food into small pieces before
processing with the appliance.
3.2 Maximum quantities and
processing time
Maximum
Ingredients
quantities
Meat/Fish
200g
Herbs
20g
Nuts
200g
Cheese
150g
Bread
1 slice
Eggs
2 eggs
(hard-boiled)
Onions
100 g
(cut in 8 pieces)
3.3 Blending
1. Put the food that you would like to puree or
mix in the measuring beaker (13) or a similar
bowl.
2. Attach the blending attachment (7) to the
motor unit (5) by pushing the attachment to
the motor until it locks. Make sure the blending
attachment is properly attached to the motor
unit.
3. Insert the plug into the wall socket.
4. Immerse the blending attachment (7) in the
measuring beaker (13), that contains the
ingredients to be blended.
Hand Blender Set / User Manual
C
5. Press and hold down the On/Off button (3).
6. Use the speed control (2) to select a speed or
C
Processing
time
10-15 seconds
C
20 seconds
15 seconds
7. Move the appliance slowly up and down and in
15 seconds
20 seconds
C
5 seconds
10 seconds
8. Release the On/Off button (3) or turbo button
9. Disassemble the blending attachment (7) only
C
C
To prevent the ingredients from
splashing, do not press the On/Off
button (3) or turbo button (4) until
the blending attachment has been
immersed in the ingredients.
– The appliance starts operating.
press and hold the turbo button (4).
– The speed indicator LED (1) illuminates
according to the desired speed 1-6.
When you use the turbo button the
appliance operates at maximum
speed. In this case you cannot adjust
the speed with the speed control (2).
While using the turbo button (4), all
speed indicator LEDs illuminate.
circles to blend the ingredients.
Always switch off the appliance
before taking out the processed
food.
(4) when you are finished and disconnect the
power plug from the wall socket. Remove the
mixture from the measuring beaker (13).
by pushing the attachment release buttons (6)
at the sides of the appliance and pulling it off
from the motor unit.
To prevent overheating do not
operate the appliance continuously
for more than 10 seconds.
Never switch on the appliance
for longer than necessary for
processing the food.
9 / 78 EN

Publicité

loading