Télécharger Imprimer la page

Honeywell TURBO FORCE HPF820 Serie Manuel De L'utilisateur page 2

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE
USING THIS FAN
When using electrical appliances, basic precautions should always be followed to reduce the risk
of fire, electric shock, and injury to persons, including the following:
FOR US MODELS ONLY - This product employs
overload protection (fuse). A blown fuse indicates
an overload or short-circuit situation. If the fuse
blows, unplug the product from the outlet. Replace
the fuse as per the user servicing instructions
(follow product marking for proper fuse rating) and
check the product. If the replacement fuse blows, a
short-circuit may be present and the product should
be discarded or returned to an authorized service
facility for examination and/or repair.
1. Use this fan only as described in this manual.
Other use not recommended, may cause fire,
electric shock or injury to persons.
2. This product is intended for household use
ONLY and not for commercial, industrial or
outdoor use.
3. To protect against electric shock, DO NOT
place fan in window, immerse unit, plug or
cord in water or spray with liquids.
4. This appliance has a polarized plug (one
blade is wider than the other). To reduce the
risk of electric shock, this plug is intended to
fit only one way in a polarized outlet. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. DO NOT attempt to
defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan to the OFF position and unplug
the fan from the outlet when not in use,
when moving the fan from one location to
another and before cleaning.
7. To disconnect the fan, first turn control to the
OFF position, grip the plug and pull it from
the wall outlet. NEVER pull by the cord.
8. DO NOT operate the fan in the presence of
explosive and/or flammable fumes.
9. DO NOT place the fan or any parts near
an open flame, cooking or other heating
appliance.
10. DO NOT operate fan with an extension cord
or power strip.
11. DO NOT operate the fan with a damaged
cord or plug or if the product malfunctions,
is dropped or damaged in any manner (see
warranty).
12. Avoid contact with moving fan parts.
13. The use of attachments not recommended
by the manufacturer may be hazardous.
14. Place the fan on a dry level surface.
15. DO NOT hang or mount HT-910 or HT-908
on ceiling or wall. These specific fans are not
wall mountable.
16. DO NOT operate if the fan housing is
removed or damaged.
17. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a distortion
of the plug. Contact a qualified electrician to
replace loose or worn outlet.
18. DO NOT operate any fan with a damaged
cord or plug. Discard fan or return to an
authorized service facility for examination
and/or repair.
19. DO NOT run fan cord under carpeting. DO
NOT cover cord with throw rugs, runners, or
similar coverings. DO NOT route cord under
furniture or appliances. Arrange cord away
from traffic areas and where it will not be a
tripping hazard.
WARNING:
Fire or Electric Shock, Do Not Use This Fan
With Any Solid State Speed Control Device
2
To Reduce The Risk of

Publicité

loading