Inventum VVW6035AW Manuel D'utilisation page 50

1. Open the latch (A) on both guiding rails.
2. Remove the cutlery drawer from the guiding rails.
STARTING THE APPLIANCE
1. Push the on/off button to start the appliance. The program-step indicator Wash goes on.
CHOOSING A PROGRAM
Note:
For an overview of the programs, refer to section
1. Use the program selector button to choose a program. The display shows the selected program and the duration.
2. Use the timer button to delay the start time of the program. Refer to section
3. Use the half-load button to add the half-load option to the selected program.
Note:
If the half-load option is not compatible with the selected program, a buzzer sounds.
4. If necessary, cancel the half-load option by pushing the half-load button again until the corresponding indicator
goes off.
5. Push the start/pause button to start the program.
CHANGING THE PROGRAM
You can change the program while the appliance is running.
1. Push the start/pause button.
2. Wait until the program stops.
3. Use the program selector button to choose another program.
4. Push the start/pause button.
The newly selected program will resume the course of the previously selected program.
DELAYING THE PROGRAM
Note:
The start time of a program can be delayed for a maximum of 24 hours.
1. Push the timer button to delay the start time of a program.
2. Push the start/pause button.
3. Push the timer button to increase the time by 1 hour.
4. Push the start/pause button to activate the timer.
Note:
Set the time to 0 to cancel the timer.
The program will start when the timer has finished.
RESETTING THE PROGRAM
You can reset the program while the appliance is running.
50 • English
'Programs'
.
'Delaying the program'
(Figure 24)
.