Hkoenig AXO940 Manuel D'instructions page 9

1. Upon the completion of the operation of the cleaner, turn off its power supply, and pull the
power plug out of the power socket, then step on the cord reeling button to reel in the power
cord fully. Hang the floor brush onto the floor brush hook, as is shown in Figure (6).
2. Place the cleaner in the dry indoor environment.
Remove the rubbish in the dust barrel frequently to avoid the failure of the cleaner.
1. Clean the dust barrel only after the power plug of the cleaner has been pulled out;
2. Put the dust barrel over the rubbish bin (bag), press down the releasing button of the dust barrel,
the bottom cover of the dust barrel will automatically fall down, and clear and empty the dust
barrel, as is shown in Figure (7).
Storage of the Cleaner
Cleaning of the Dust Barrel
Figure (6)
Figure (7)