Error displays/Messages
ERROR
The disc is dirty or inserted upside down.
– Clean or insert the disc correctly.
A blank disc has been inserted.
The disc cannot play due to a problem.
– Insert another disc.
Press (eject) to remove the disc.
FAILURE
The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
this model to check the connection.
NO MUSIC
The disc does not contain a music file.
– Insert a music CD in this unit.
NO NAME
A disc/album/artist/track name is not written
in the track.
OFFSET
There may be an internal malfunction.
– Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
PUSH EJT
The disc cannot be ejected.
– Press (eject) (page 6).
READ
The unit is reading all track and album
information on the disc.
– Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
"
" or "
During reverse or fast-forward, you have
reached the beginning or the end of the disc
and you cannot go any further.
"
"
The character cannot be displayed with the
unit.
For SiriusXM (CDX-GT360MP only):
CH LOCKD (Channel Locked)
The selected channel is locked by the parental
CH UNAVL (Channel Unavailable)
The selected channel is not available.
The active channel has become unavailable.
CH UNSUB (Channel Unsubscribed)
There is no subscription to the selected
The subscription to the active channel has
CHK TUNR (Check Tuner)
The SiriusXM tuner is not functioning
CHEK ANT (Check Antenna)
The antenna (aerial) is not being used
NOSIGNAL (No Signal)
The service is stopped due to a signal
SUB UPDT (Subscription Updated), PRESS
SELECT
Your subscription has been updated.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of
CD playback trouble, bring the disc that was
used at the time the problem began.
"
control function.
channel.
been terminated.
properly.
– Disconnect the SiriusXM tuner, and connect
it again.
properly.
– Make sure the antenna (aerial) is connected
and being used properly.
interruption.
– Press the select button.
19