Panasonic NN-SD698S Mode D'emploi page 14

IP3020_38X03CP_10_100514
* The control panel of
NN-SD670S has the
same key layout as
NN-SD698S.
Popcorn Button
(☛ page 16)
Time/Weight and
Sensor Menu Dial
(☛ page 14)
Power Level Button
(☛ page 15)
Timer/Clock Button
(☛ page 22, 13)
Stop/Reset Button
Before cooking: One tap
clears all your instructions.
During cooking: One tap
temporarily stops the
cooking process. Another
tap cancels all your
instructions, and time of
day or colon appears in
the Display Window.
Beep Sound:
When a button is pressed correctly, a beep will be heard.
If a button is pressed and no beep is heard, the unit did not or cannot accept the instruc-
tion. When operating, the oven will beep twice between programmed stages. At the end
of any complete program, the oven will beep 5 times.
NOTE:
If there is no operation for 6 minutes after setting cooking program, the oven will automat-
ically cancel the cooking program. The display will return to clock or colon display.
2010.5.14 5:32 PM
Control Panel
12
Page 14
Display Window
Sensor Reheat Button
(☛ page 19)
Sensor Cook Button
(☛ page 19)
Inverter Turbo Defrost
Button
(☛ page 17)
Keep Warm Button
(☛ page 15)
Quick Min Button
(☛ page 15)
More/Less Button
(☛ page 16)
Start Button
After cooking program
setting, one tap allows
oven to begin functioning.
If door is opened or
Stop/Reset Button is
pressed once during oven
operation, Start Button
must be pressed again to
restart oven.