Your product has been engineered and manufactured to
Ryobi's high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you
years of rugged, trouble-free performance.
WARNING
To avoid serious personal injury, do not attempt to use
this product until you read thoroughly and understand
completely the operator's manual. Failure to comply
may result in accidents involving electric shock, fire,
and/or serious personal injury. Save this operator's
manual and review frequently for continuing safe
operation and instructing others who may use this
product.
WARNING
The product is not designed for use with any other
Ryobi or similar type attachment. Only use the Pro
Cut attachment supplied with this engine. Using other
attachments will void your warranty.
GENERAL SAFETY RULES
■ Do not allow children or untrained individuals to use
this product. Local regulations may restrict the age of
the operator.
■ Never start or run the engine inside a closed or poorly
ventilated area; breathing exhaust fumes can kill.
■ Clear the work area before each use. Remove all
objects, such as rocks, broken glass, nails, wire that
can lead to accidents.
■ Always wear eye protection with side shields marked to
comply with standards, along with hearing protection.
Failure to do so could result in objects being thrown
into your eyes and other possible serious injuries.
■ Wear head and eye protection to prevent injury from
falling debris.
■ Wear heavy, long trousers, boots and gloves. Do not
wear loose fitting clothing, shorts, jewellery of any
kind, or go barefoot.
■ Secure long hair so it is above shoulder level to
prevent entanglement in any moving parts.
■ Keep all bystanders, children, and pets at least 15 m
away. Stop the product if anyone enters the area.
■ Do not operate this unit when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
■ Do not operate in poor lighting.
■ Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure
English(Original instructions)
■ Keep all parts of your body away from any moving
■ Do not touch area around the exhaust, silencer or
■ Always stop the engine and remove the spark plug wire
■ Inspect the unit before each use and after any impact
■ Replace any damaged parts before use.
■ Check for and tighten any loose parts.
■ Mix and store fuel in a container approved for fuel.
■ Mix fuel outdoors where there are no sparks or flames.
■ Stop the engine and allow to cool before refuelling or
■ Remove all debris from the work area before operating.
■ Allow the engine to cool; empty the fuel tank and
■ Wear your protective equipment and observe all safety
■ Heavy protective clothing may increase operator
Inspection after dropping or other impacts: Thoroughly
inspect the product and identify any affections or
damage with it. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.
WHEELED TRIMMER SAFETY RULES
■ Replace string head if cracked, chipped, or damaged
■ Make sure all guards, deflectors and handles are
■ Use only original manufacturer's replacement parts,
3
to hot surfaces.
part.
engine of the unit; these parts get hot during operation.
before refuelling, cleaning, maintenance or storage.
for loose fasteners, fuel leaks, etc.
Wipe up any fuel spillage. Move 9 m away from
refuelling site before starting engine.
storing the unit.
secure the unit from moving before transporting in a
vehicle.
instructions. For units equipped with a clutch, be sure
the cutting attachment stops turning when the engine
idles. When the unit is turned off make sure the cutting
attachment has stopped before the unit is set down.
fatigue, which could lead to heat stroke. During
weather that is hot and humid, heavy work should be
scheduled for early morning or late afternoon hours
when temperatures are cooler.
WARNING
in any way. Make sure the trimmer head is properly
installed and securely fastened. Failure to do so can
cause serious injury.
properly and securely attached.
accessories and attachments.