MO-EL 891 Emploi Et Entretien page 13

5. MAINTENANCE
The IR Industrial Heaters contain no moving parts and therefore very
little maintenance is required other than to ensure that there is no
excessive build-up of dust/dirt on the reflectors or emitters as this
can cause overheating and premature emitter failure. To clean the
appliance, wipe off with a damp cloth. Wait until it is completely dry
before connecting to the power supply.
6. EMITTER REPLACEMENT
The emitters used in the IR heater are robust and if knocks and
shock vibrations are avoided, they will last for around 3000 hours.
They should be substituted even before if there are signs of aging.
Due to the special sealing and anti-shock design of the heater, the
emitters are not intended to be user replaceable. Please ensure that
all emitters are replaced via the Mo-El service network
Data
Thermal power
Nominal thermal power
Minimum thermal power(indicative)
Maximum continuous thermal power
Auxiliary consumption of electricity=0
Type of heat output/room temperature control
Single stage heat output, no room temperature control
With electronic room temperature control plus week timer
Other control options
Room temperature control, with open window detection
Value
Symbol
891
891ED
P
2
nom
P
2
min
P
2
max c
13
Unit
892L 893L
892LED 893LED
892P 893P
892PED 893PED
4 6 kW
4 6 kW
4 6 kW
891 891ED
892L 892LED
893L 893LED
892P 892PED
893P 893PED
X X
X
X