MO-EL 891 Emploi Et Entretien page 12

3. TECHNICAL FEATURES
The infrared Industrial Heaters range is constituted by appliances
having one, two, or three modules. Each module have a 2000 W
lamp.
Model
Power supply
Power
Current
Lamps
Range
Weight
Cable H05RN-F (min.section) 3 x 1,5 mm²
4. USE INSTRUCTIONS
The Industrial infrared heater was designed for zone heating on large
premises. Production departments, churches, gymnasiums are ideally
application sites. With high efficiency on heating from long distance,
a compact size and a light weight a wide range on installation can be
easy made. The comfort is immediate, no preheating is necessary
and this can give a large cost saving on wide air volume or where
there is discontinuous presence. The radiant heating give a pleasant
comfort and the absolute silence is assured without moving parts.
Without air movements there isn't the spreading of particles or dust.
Switch on the heater simply by connecting to the power supply.
•
Do not touch the metallic parts when the heater is working.
•
Ensure that the rays of the heater are directed towards the area it
•
is wished to heat. If necessary, change the angle of inclination by
loosening the screws of the support or the modules.
In unoccupied premises it is recommended that the heating system
•
is switched off by disconnecting from the electrical supply.
Avoid exposing skin to the rays of the appliance for distances
less than 50 cm.
Avoid exposing eyes to the rays of the appliance for distances
less than 2.70 m.
All users should be made aware of all aspects of operation and
safety and these instructions should be retained for reference.
891 892L
220-240 V ~ 220-240 V ~
50-60 Hz 50-60 Hz
1 x 2000 W 2 x 2000 W
9 A 18 A
1 2
6 m² 9 m²
2,5 kg 3,9 kg
3 x 2,5 mm²
12
893L 892P
380-415 V ~
220-240 V ~
50-60 Hz
50-60 Hz
3P+N
3 x 2000 W 2 x 2000 W
3 x 9 A 18 A
3 2
12 m² 12 m²
5,6 kg 4,2 kg
5 x 1,5 mm² 3 x 2,5 mm²
893P
380-415 V ~
50-60 Hz
3P+N
3 x 2000 W
3 x 9 A
3
18 m²
6,0 kg
5 x 1,5 mm²