Publicité
ASSEMBLY AND HOOK-UP INFORMATION
• Propane cylinders (tanks) are not included with these heaters.
• Remove the heater from the carton.
• Use only vapor withdrawal LP gas cylinders constructed for use with propane only (HD-5) and marked in accordance with the
specifications for LP gas cylinders of the U.S. Department of Transportation (DOT SPEC. 39).
• This heater must be used only with a vapor withdrawal LP gas bulk tank equipped with a standard POL valve – Do Not use
this heater on bulk tanks greater than 20 pounds LPG capacity (50 pounds water capacity).
DUAL BURNER MODEL
1. Use a phillips head screw-driver to remove the two screws located in the collar bracket. Set aside for later use.
2. Place the collar bracket onto the tank with the tank collar bracket over the tank collar. Mounting bolt knob should be
positioned to the outside of the tank collar. Firmly secure the collar bracket to the tank by hand-tightening the mounting bolt
knob. Do not overtighten.
WARNING: Never leave the heater unattended while operating.
Disconnect the heater from its power source when not in use.
-4-
Publicité
