Télécharger Imprimer la page

HIKVISION DS-TMT1A0 Guide De Démarrage Rapide page 5

Publicité

information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
A 급 기기 : 이 기기는 업무용 (A 급 ) 전자파적합기기로써 판매자
또는 사용자는 이 점을 주의하시기바라며 , 가정 외의 지역에서
사용하는 것을 목적으로 합니다 .
Safety Instructions
Use of the product must be in strict compliance with the local laws and
regulations. Please shut down the device in prohibited area.
Use of the product must be in strict compliance with the local electrical
safety regulations.
Use the power adapter provided by qualified manufacturer. Refer to the
product specification for detailed power requirements.
It is recommended to provide independent power adapter for each
device as adapter overload may cause over-heating or a fire hazard.
Make sure that the power has been disconnected before you wire,
install, or disassemble the device in the authorized way according to the
description in the manual.
To avoid electric shock, DO NOT directly touch exposed contacts and
components once the device is powered up.
DO NOT use damaged power supply devices (e.g., cable, power adapter,
etc.) to avoid electric shock, fire hazard, and explosion.
DO NOT directly cut the power supply to shut down the device. Please
shut down the device normally and then unplug the power cord to avoid
data loss.
The socket-outlet shall be installed near the equipment and shall be
easily accessible.
Make sure the power supply has been disconnected if the power
adapter is idle.
Connect to earth before connecting to the power supply.
To avoid heat accumulation, good ventilation is required for a proper
operating environment.
Store the device in dry, well-ventilated, corrosive-gas-free, no direct
4

Publicité

loading