Télécharger Imprimer la page

Cuda surgical Elite 1000 Mode D'emploi page 11

Masquer les pouces Voir aussi pour Elite 1000:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
8.2 Warranty
The illuminator carries a 3-year warranty from the date of shipment on workmanship and all
defects of material.
Should your product prove to have such defects within three years of shipment, CUDA
will repair or replace the product or component part without charge. Should your product(s) need
servicing under this warranty, please contact CUDA
authorization documentation.
Please carefully pack the unit in a sturdy carton and ship it to the factory. Please include a note
describing the defects, your name, telephone number and a return address. Warranty does not
cover equipment subject to misuse, accidental damage, normal wear, and tear or if transferred to
a new owner without authorization from CUDA
rights and you may also have other rights that vary from state to state.
8.3 Repair
You may return your product(s) for repair, shipping prepaid to the factory. Your product will be
inspected, and an estimate of repair charges will be submitted to you for approval.
PHONE: +1 (877) 814-2237
FAX: +1 (904) 733-4832
8.1 Troubleshooting
Problem
The power indicator (refer to
section 5) is not lit.
The power indicator is lit but
the lamp will not ignite.
9.
END OF PRODUCT LIFE
In accordance with the European Waste from Electrical and Electronic Equipment (WEEE) directive,
we encourage our customers to recycle this product whenever possible. Disposal of this unit must be
performed in accordance with the applicable local environmental regulations.
In the US a list of recyclers in your area can be found at: http:/www.eiae.org/.
Please contact customer service to issue a return authorization to return product to manufacturer at
the end of product life.
10. SYMBOLOGY
®
LIT-217 CUDA
Surgical
Rev.F
®
Surgical. This warranty gives you specific legal
INTERNATIONAL: +1 (904) 208-2290
Check that the AC power cord is properly connected
Check the circuit breakers. If necessary, reset.
Power input switch is in the off position
Check lamp connection.
Check that the lamp door cover is secured.
Check hour meter if lamp hours exceed the rated lamp life
Replace the lamp (refer to 8.1).
Manufacturer
Date of manufacture (YYYY-MM-DD)
Symbol for Authorized Representative in the European
Community
Page 11 of 98
®
Surgical or a local distributor for return
Solutions
®
Surgical
(English)

Publicité

loading

Produits Connexes pour Cuda surgical Elite 1000