Siemens TI35A Serie Mode D'emploi page 10

en Getting to know your appliance
Controls
Button Meaning
Switch the appliance on and off
k The appliance rinses automatically when it is switched on and off.
The appliance is not rinsed if:
■
■
The appliance is ready for use when the LEDs of the buttons for selecting drinks light
up in the control panel. The appliance has automatic switch-off. ~ "Selecting
automatic switch-off" on page 17
Dispensing Espresso
espresso
Dispensing Caffe crema
caffe crema
cappuccino Dispensing cappuccino
latte macchiato Dispensing latte macchiato
Frothing up milk
milk
Coffee strength
%
Adjusting the coffee strength ~ "Adjusting beverage settings" on page 14
Start the service programme
calc'nClean
Flashes when the service programme needs to be performed.~ "Calc'nClean
service programme" on page 22
--------
Symbol
Lights up when the water tank needs to be topped up with water or the water tank is not
'
inserted.
Flashes when the water filter needs to be replaced.
( Lights up when trays need to be emptied.
Flashes when door of brewing chamber is open.
is continu- Ready to use, selection possible
ously lit
is pulsing Dispensing underway
is flashing Waiting for operation, e.g. with calc'nClean
off Not available
--------
10
it is still warm when switched on, or
coffee was not dispensed before the appliance was switched off.