Bluetooth ® Connection - Zephyr Roma Groove ZRG-E30AS Guide D'utilisation, D'entretien Et D'installation

Features & Controls
4. INCREASE VOLUME BUTTON
►
Increase Volume
Press the button to increase the volume on the paired device.
►
Next Track
Hold the button to skip forward to the next track.
NOTE: The hood blower or lights do not need to be powered on for the speakers to activate. In
addition, the play & pause, decrease volume, and increase volume buttons can still be
accessed from the user's device.
Bluetooth Connection
®
How to connect and pair to the Zephyr Bluetooth ® Stereo Speakers for the first time:
1. To play your personal music or audio files, a Bluetooth ® capable device is required.
2. Set the device to a low-to-midrange volume before connecting to the speakers.
3. Ensure the speakers are powered on by pressing the
the speakers.
4. Pair your device with the speakers:
Follow the instructions that came with your device to access the Bluetooth ® settings and
►
enable Bluetooth ® (if it hasn't already been enabled). Most devices will require the user to go
to the "Paired Devices" (or similar) screen and press "Search for Devices" (or similar) to search
for the Bluetooth ® speakers.
►
The unit name for the speakers will be discovered as "Zephyr Bluetooth" under Available
Devices, Discoverable Devices, or similar. If the speakers were not discovered, repeat the
process by powering off and powering on the speakers.
5. Open up your personal music or audio files on your connected device and play your desired music
or audio files. The audio will be played from the Bluetooth ® speakers.
6. When you're done playing your personal music or audio files, disconnect from the speakers by
pressing the button. (1) high-pitched beep will be played if disconnecting from the user's
device, and (4) neutral tone beeps and (1) high-pitched beep will be played if disconnecting from
the speakers.
24
button and the device is within range of
Roma Groove Use, Care, and Installation Guide
C O R E
R O M A G R O O V E
WA L L