Fimar TV2000RN Emploi Et Entretien page 39

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ VEGETABLE SLICER TV2000RN - TV2500 - TV3000N
Table 3: Operating malfunctions
Problem
The equipment does not start.
The tool rotation direction is
incorrect.
Causes
Main switch off.
No mains power.
The presser was not lowered.
Fuse burnt-out.
Appliance power phase wires
are incorrectly connected.
- 13 -
Solutions
Turn on main switch.
Contact your dealer or
authorised service centre.
Lower the presser.
Contact customer service.
Have an expert technician invert
power wires.
English language
GB