Panasonic WV-CW970 Mode D'emploi page 49

Scene select setting
Using the Scene Select Setting
Menu
Display the scene select setting menu from the setup
menu to configure scene select settings. First, display
the scene select setting menu.
1. Display the setup menu (page 24), move the cursor
to SCENE SELECT O, and then press the CAM
(SET) button.
This will display the scene select setting menu.
**SCENE SELECT**
SCENE
LOAD
RET TOP
Scene Select Settings
See page 25 for information on the scene select
settings method.
INDOOR(L)
-49-