Klarstein AQUAVITA CHALET Mode D'emploi page 14

EN
14
PRODUCT OVERVIEW
A Lid Cover
B Filer
C Body
D Base
E Power Indicator Light
F On/Off Switch
G Handle
H Thermometer
INITIAL COMMISSIONING
Boil 2x clear water before the first use:
1. Fill the jug.
2. Place the jug on the base station.
3. Set the power connection
4. Switch on the device. This will switch on the operation led.
5. The boiler switches off automatically after use.
Note: Do not open the lid during pouring. Do not overfill the boiler with water. In this
case the water will boil over.