Publicité
Les langues disponibles
Les langues disponibles
Drain filter
You should clean the drain filter 5 or 6 times a year to prevent it from clogging.
NOTE
If the drain filter is clogged, the "5C" information code appears on the washer's display screen.
Untitled-1 47
1. Turn off the washer, and then unplug the power cord.
2. Gently press the top area of the filter cover to open.
3. Drain the remaining water inside the drum. See the
Emergency drain section on page 45.
4. Turn the drain filter knob (A) counterclockwise, and
then drain the remaining water.
5. Clean the drain filter using a soft brush. While the
drain filter is removed, make sure the impeller inside
the drain pump is free of debris.
6. Reinsert the drain filter, and then turn the filter knob
clockwise.
7. Close the filter cover.
NOTE
• Some drain filters feature a safety knob that is
designed to prevent children from accidentally
opening the filter compartment. To open the
safety knob of the drain filter, push in and turn it
counterclockwise. The spring mechanism of the
safety knob helps open the filter.
• To close the safety knob of the drain filter, turn it
clockwise. The spring makes a rattling sound, which
is normal.
• Before closing the filter cover, make sure the drain
filter is properly inserted.
English 47
2024-01-18
3:06:10
Publicité
