Publicité
Les langues disponibles
Les langues disponibles
Installation
STEP 5 Connect the drain hose
26
English
Untitled-1 26
5. Open the water taps, and check for leaks.
To a Laundry Tub or Drain Pipe
1. Check the height (A) of your drain system and make
sure the minimum and maximum heights shown
below are met.
Minimum
Maximum
NOTE
• Make sure to measure the height from the floor
where the washer is placed.
• Draining efficiency may be reduced if the drain
system is at the maximum height.
• To prevent the washer from siphoning water, do not
use a drain system below the minimum height.
2. Attach the drain hose to the plastic hose guide (B).
18 in. (46 cm)
96 in. (245 cm)
2024-01-18
3:06:05
Publicité
