Publicité
Les langues disponibles
Les langues disponibles
FAN INSTALLATION
10. Connect wiring harnesses and Earth/Ground wire
Connect the two wiring harnesses from the downrod to the harnesses on the back of
the control box (Fig. 10.1). Remove ground screw and tag from mounting bracket and
secure green Earth/Ground wire from downrod to mounting bracket (Fig. 10.1).
Connect wiring harness from ceiling to wiring harness on front of control box (Fig. 10.2).
Peel backing off of double-sided tape on mounting bracket and secure ferrite core to
tape (Fig. 10.2).
Fig. 10.1
Wiring Harnesses
Earth/Ground Wire
Fig. 10.2
Ferrite Core
Wiring Harnesses
17
Publicité
