Publicité
Les langues disponibles
Les langues disponibles
FAN INSTALLATION
2. Wire fan
Disconnect power to fan location before wiring fan.
Do not connect fan to a damaged power source. Do not attempt to resolve
electrical failures on your own. Consult a qualified electrician if uncertain of the
electrical installation of this fan.
Do not use the fan with a dimmer switch or a third-party switch.
Connect wires from mounting bracket to supply power wires (Fig. 2). Carefully tuck
wiring into outlet box or building structure so that only the wiring harness is hanging
out. Ensure wire connectors are turned upward and that wires are spread apart
with grounded conductors on one side of the outlet box/mounting structure and
ungrounded conductors on the other side.
Supply Power Wire Colors
AC Hot/L1
Brown
AC Neutral/L2
Blue
PE/Earth Ground
Green with Yellow
8
WARNING
North America
100–120 V
Black
White
Green or Bare
Copper
Australia
Brown or Red
Black or Light Blue
Green with Yellow
All other regions
Brown
Blue
Green with Yellow
Publicité
