Eaton Crouse-Hinds GHG 514 Mode D'emploi page 17

Explosion protected plug and socket
system 60 A, 4-pole and 5-pole,
GHG 514
Class I Zone 1
Class I Div. 2
Class II Div. 1
C
GHG 510 7003 P0004 E (C)
Group A,B,C,D
Group F,G (CSA)
US
CAUTION
Read these annex to opera-
ting instruction sheet and
the original operating
instructions
"GHG 510 7001 P0001"
completly, all sheets, before
wiring and use.
Annex to operating instructions
WARNING
Do not alter this product in any
way.
Doing so may lead to serious
injury or death.
To avoid dangerous overheating,
do not use aluminium wiring.
Use copper wire only.
To avoid electrical shock
electrical power must be "off"
before and during installation,
inspection and maintenance.
To avoid electrical shock, always
disconnect primary power
source before opening device or
enclosure for inspection or
service.
Observe the national safety rules
and regulations.