Page 1
3-in-1 Multi Game Table Table Multi-jeux 3 en 1 SP37328 USA office: Fontana AUS office: Truganina GBR office: Ipswich FRA office: Saint Vigor d'Ymonville THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Page 2
Soccer Playfield Billiard Mainframe End Apron -Hockey Playfield Cadre de billard Panneau d’extrémité Terrain de football Before You Start - Terrain de hockey Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order.
Page 3
1/4'' x 1-1/8'' Bolt 1/4″ Washer Allen key Goal Box-Top Goal Box-Bottom Pusher Clé Allen Boulon de 1/4'' x 1-1/8'' Rondelle 1/4″ Boîtes de but Boîtes de but Buteur de hockey supérieures inférieures 4x35mm Screw 3x18mm Screw 4x12mm Screw 5-Hole Rod Felt Pad Round Puck Tige à...
Page 4
FIG.1 IMAGE.1 ASSEMBLY INSTRUCTIONS: 1.Find a clean, level place to begin the assembly of your Multi Game. The table will be assembled upside down and then turned over on its legs once the assembly is completed. This game table is heavy, and turning it over will require at least two strong adults. 2.Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list pages.
Page 5
FIG.2 5. Attach the Leg Panels (#8) to the Legs using four Screws(#A8) per Leg Panel. See FIG. 2. IMAGE.2 6. Lift the table assembly from the floor with two strong adults, turn it over, and set table on its legs in the location where you play.
Page 6
FIG.3 FIG.4 IMAGE.3 IMAGE.4 FIG.4A IMAGE.4A The groove for Soccer & Hockey Playfield /Le sillon pour les Terrains de Football et de Hockey FIG.4B IMAGE.4B 7.Attach two Side Aprons (#6) to the one End Apron (#2) using four Screws (#A4). See FIG. 3. Note: Do not tighten the Screws at this step.
Page 7
FIG.5 FIG.6 FIG.6B IMAGE.6 IMAGE.5 IMAGE.6B X 13 X 13 X 16 X 16 Handle Hole Trou de Poignée FIG.5A IMAGE.5A FIG.6C X 24 X 26 IMAGE.6C 12.Turn the Soccer Table (See FIG. 5) over and then place it on X 16 the top of the Billiard Mainframe (#1).
Page 8
15.Slide the Rods (#21, #22 and #23)) through the Rod Bushings (#P2) on one Side Apron (#6) in the order as shown in Fig. 6A and 6B. Note: The Rods have a hole at the end where their Handles will Soccer Football 16.Place the Rod Washers (#12), Foam Bumpers (#13) and...
Page 9
DIRECTIONS FOR PLAYING VARIOUS GAMES 1)Billiard - Play the game as assembled using the Billiard Ball Set (#26), Cue (#27), Triangle (#28). Return / Damage Claim Instructions 2)Soccer - Place the Soccer table on the top of the Billiard Frame. Play the game using the Soccer Ball (#5). DO NOT discard the box / original packaging.