Franke FCR 925 I BK XS CH LED0 Mode D'emploi Et Installation page 24

USE
T1
Button Function
Turns the Motor off.
T1
Turns the motor on at speed one
T2
Turns the Motor on at speed two
T3
Press and hold for 2 seconds to activate
switch-off with a 30 minute delay (Mo-
tor+Lights). It is possible to change the oper-
ating speed with this function activated.
Turns the Motor on at speed three
T4
Press and hold for 2 seconds to activate In-
tensive speed with a timer set to 6 minutes,
after which it returns to the speed that was
set previously. Suitable to deal with maxi-
mum levels of cooking fumes.
Turns the Lighting system on and off at max-
L
imum intensity.
EN
Control panel
T2 T3 T4 L
Buttons T1+T2 are lit.
Buttons T1+T3 are lit.
Buttons T1+ (T2 or T3 or
T4, respectively) flash.
Buttons T1+T4 are lit.
The Button flashes.
Button on
2
24
4