Publicité
UNDER / ON-TABLE MOUNTING
There are two recesses on the top and bottom of the housing, each with two M3 threaded holes, for
mounting underneath or on top of the table. Attach the two included mounting plates to the top or
bottom using the included M3 countersunk screws. Now the amplifier can be mounted in the desired
position (see illustration, mounting screws not included). For tabletop mounting, the four rubber feet
must first be removed.
CARE, MAINTENANCE AND REPAIR
In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned and,
if necessary, serviced. The maintenance requirement depends on the intensity of use and the
environment in which it is used.
We recommend a visual inspection before each operation. Furthermore, we recommend carrying out
all the applicable service measures specified below once every 500 operating hours or, in the case of
a lower intensity of use, at the latest after one year. Warranty claims may be limited should defects
result from inadequate service and maintenance.
CARE (CARRIED OUT BY USER)
WARNING! Before carrying out any care and maintenance work, the power supply and,
if possible, all device connections must be disconnected.
NOTE! Improper care can lead to impairment or even destruction of the device.
1. Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can
penetrate the device.
2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used,
make sure that damage to the device is prevented (e.g. fans must be blocked in this case).
12
Publicité
