SW-Motech FBL.07.975.20000 Instructions De Montage page 60

3
Insert the deflection rod onto the ball pin (Orig) screwed to the gear lever (1);
secure the connection with the original safety bracket (Orig.).
Screw the shift gear (1) to the vehicle using the original screw (Orig.).
 WARNING: Use a liquid threadlocker!
Tighten the original screw (Orig.) according to the manufacturer's
instructions.
Adjust the tread (2) according to your driving habits.
Then tighten the screw (3) as specified in the mounting instructions.
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
6
Errors and omissions excepted
Subject to technical and design changes.