Machine Packaging; Preliminary Operations; Using The Machine For The First Time - Spidem My Coffee Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46
24
Key to Machine Components
Coffee bean hopper with cover
Service door
Coffee grounds drawer
Dispensing spout (height-adjustable)
Drip tray + grill
Control panel
Hot water / steam wand with Pannarello frother
Water Tank
Power cord
Hot water / steam knob
Cup stacking surface
Drip tray
Brew group
Control panel
Small coffee brew button
Long coffee brew button
Steam button
Power button
Warning light
Temperature light
Steam / double coffee light
Descaling light
Accessories
Grinder adjustment key
Brew group lubricant
KEY TO MACHINE COMPONENTS - INSTALLATION
4
INSTALLATION
For your own safety and that of others, carefully fol-
low the "Safety Regulations" in section 3.
4.1

Machine Packaging

The original packaging has been designed and
constructed to protect the machine during transport.
We recommend keeping the packaging carton for
possible future transportation.
4.2

Preliminary Operations

• Remove the drip tray (5) with grill from the
packaging.
• Remove the coffee machine from the packaging
and position it in a proper place in compliance with
the requirements described in the safety regulations
(section 3).
• (Fig.15) - Place the drip tray (5) into the machine.
• Before plugging the machine into the socket, be
sure that all steps outlined in section 4.3 have been
completed.
Important Note: Carefully read the explanation
of all the warnings displayed by the machine
by means of the lights on the control panel (section
12).
4.3

Using the Machine for the First Time

• (Fig.3) - Lift the water tank (8) slightly and remove it
from its seat.
• (Fig.4) - Rinse and fi ll it with fresh water taking care
not to overfi ll it. Replace the water tank.
Always use only fresh, non-sparkling water to
fi ll the tank (8). Hot water or any other liquid
may damage the tank and/or the machine. Do not turn
on the machine with empty tank: make sure there is
enough water in the tank.
• (Fig.1) - Remove the cover from the coffee bean
hopper (1).
• (Fig.2) - Pour in coffee beans.
Note: The grill on top of the coffee bean
hopper can not and need not be removed.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

My coffee rapid steamSup 035Sup 035r

Table des Matières