WARNING:
•
Do Not Use oxygen or reactive gases; explosion may occur.
•
Do Not Exceed air pressure of 250 PSI.
•
Read all manuals included with this product carefully.
Be thoroughly familiar with the controls and the proper use
of the equipment.
•
Do not exceed any pressure rating of any component
in the system.
•
Disconnect the air tool from air supply before changing tools
or attachments and during non-operation.
•
Always use attachments designed for use with air
powered tools.
•
Do not use damaged or worn attachments.
•
Check air hoses for weak or worn condition before each use.
Make sure all connections are secure.
•
Keep all nuts, bolts and screws tight and ensure equipment is
in safe working condition.
DANGER: RISK OF EXPLOSION OR FIRE
WHAT CAN HAPPEN
• Exceeding the maximum
pressure rating of tools
accessories could cause an
explosion resulting
in serious injury.
HOW TO PREVENT IT
• Use compressed air regu-
lated to a maximum pressure
at or below the rated pressure
of any attachments.
DANGER: RISK TO BREATHING (ASPHYXIATION)
WHAT CAN HAPPEN
• Abrasive tools, such as
grinders, sanders, and
cut-off tools generate dust
and abrasive materials which
can be harmful to human
lungs and respiratory system.
CAUTION: RISK FROM NOISE
WHAT CAN HAPPEN
• Long term exposure to noise
produced from the operation
of air tools can lead to
permanent hearing loss.
4
HOW TO PREVENT IT
• Always wear MSHA/NIOSH
approved, properly fitting face
mask or respirator when using
such tools.
HOW TO PREVENT IT
• Always wear ANSI (S3.19)
hearing protection.