Domo DO1105C Mode D'emploi page 29

PARTS
1. Handle
2. Safety lock clip
3. 'On/off' indicator light
4. 'Ready to use' indicator light
5. Unlocking the baking tray to release it
6. Baking trays for toasted sandwiches
7. Baking trays for waffles
8. Baking trays for grilling
9. Cable storage
1
2
3
4
BEFORE THE FIRST USE
· Remove all packing materials and carefully clean the appliance before first use (See "Cleaning and
maintenance").
· Attention: when using the appliance for the first time, the baking trays may emit a small amount of
smoke and odour. This is normal. Clean the appliance with absorbent paper or a clean, dry cloth to
remove any residue.
· Place the unit preferably on a surface that is easy to clean. The surface should also be heat-resistant.
Do not place the appliance on an untreated wooden surface.
· Make sure that there is enough ventilation around the grill.
FITTING AND REMOVING THE BAKING TRAYS
1. Remove the mains plug from the wall socket and wait until the appliance
has cooled down completely. Choose the sandwich toaster, waffle tray or
grilling tray. Attention: never use the appliance with only 1 baking tray.
Always make sure 2 baking trays are fitted correctly.
2. Place the baking trays in the appliance through the openings provided
along the hinge. The baking trays have a wider end on one side than the
other. The wide end should slide into the appliance along the hinge of the
appliance. Then click on the other side.
3. To remove the baking plates from the appliance, slide the release lever
out.
Attention: do not allow the baking trays to come into contact with metal
cutlery or other metal objects in order to avoid causing damage to the non-stick
coating. Always use a heat-resistant plastic or wooden spatula.
www.domo-elektro.be
5
8
6
7
9
29
DO1105C