Toro 51346 Manuel De L'opérateur page 4

Starting the Trimmer
To start the trimmer, squeeze the trigger.
Stopping the Trimmer
To stop the trimmer, release the trigger.
Trimming
Edging
All manuals and user guides at all-guides.com
4
m–6412
m–6316
m–6325
3352-878
Lengthening the Line
To increase the length of
the cutting line, tap the
spool on the ground
while the trimmer is
running.
Note: The blade under
the guard will cut the
line to the correct length.
Important: Use the following precautions to ensure
optimal line performance.
• Do not hold the spool on the ground.
To help prevent line tangle, tap only once to
•
lengthen line. If additional line is required, wait a
few seconds before tapping the trimmer head.
If the line is not advanced occasionally, it will
•
wear down to the eyelet. When the trimmer stops,
the short line may retract into the cutter head.
Should this occur, remove spool, refeed the line
through eyelet, and assemble spool to trimmer.