Publicité
Les langues disponibles
Les langues disponibles
Other connections
Recording mode
The Recording mode allows you to make
analog recordings from the LINE 1 (OUT)
jacks.
When Recording mode is on, most sound-
related functions (including SURROUND,
ADVANCED, AUTO, SYSTEM SETUP)
become inactive. The display will briefly blink
RecMode On if you try and use a prohibited
function while Recording mode is on.
When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.
1
Press SOUND.
2
Use the
(cursor left/right)
buttons to select 'Rec Mode?'.
3
Press ENTER.
4
Use the
(cursor up/down)
buttons to select 'R.Mode On' or 'R.Mode
Off'.
• When Recording Mode is On a stereo
downmix of multi-channel DVD-Audio
and SACD discs is output from the
speakers and from the analog audio
jacks. Note that with some DVD-Audio
disc, only the front left/right channels are
output. When set to Off, multi-channel
DVD-Audio and SACD discs are played
through all the speakers, but front L/R
audio is output from the analog audio
jack.
• When R.Mode On is selected while
playing SACD, the unit will loose speaker
SW output and bass will become
inaudible.
Connecting using the S-video
output
If your TV has an S-video input, you can use
this instead of the standard video output for a
better quality picture.
•
Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
TV
E1
VIDEO
S-VIDEO
OUT
OUT
VIDEO
L
R
NE1
TV
UT
IN
XV-DV940/830
• The S-video ouptut is switchable between
S1 and S2 formats for compatibility with
all TVs. See S-Video Out on page 66 for
more on this.
S-VIDEO
INPUT
ANTENNA
FM UNBAL
AM L
75
ANTE
P
P
Y
AUDIO
R
B
LINE1
LINE2
COMPONENT
IN
IN
VIDEO OUT
11
75
En
Publicité
