MSI PRO B660M-P Manuel D'utilisation page 16

Wi-Fi/ Bluetooth PCIe Card Installation (PRO B660M-P WIFI DDR4)
Please follow the steps below to install the WiFi/ Bluetooth PCIe card.
1. Install the Wi-Fi/Bluetooth PCIe card into a PCIe x1 slot.
2. Connect one end of the USB cable to the USB connector on the card.
3. Connect the other end of the USB cable to the USB 2.0 connector on the
motherboard.
4. Use the screw to secure the card.
5. Screw the antennas tight to the RP-SMA connectors on the Wi-Fi/Bluetooth PCIe
card as shown.
Antennas
⚠
Important
Make sure all cables are properly connected.
Wi-Fi/Bluetooth PCIe card
4
5
1
5
PCIe x1 slot
15
2
USB cable
3
USB 2.0 connector