Assembly With Wall Feedthrough; Important; Wall-Mounted Assembly With Spiral Hose - Franke FAID100 Notice De Montage Et De Mise En Service

12. Assembly with wall feedthrough

☞

Important!

• Prior to the assembly process, flush the pipework in accordance with DIN 1988.
• Mount the emergency shower in accordance with EN 15154 Part 2.
12.1 Mounting the wall bracket, see
12.2 Insert the eye shower (a) into the wall bracket (b), see
12.3 Mount the wall feedthrough (c) on the perforation provided.
12.4 Insert the hose (d) through the wall feedthrough (c).
Caution!
Note the installation position of the filter (e).
12.5 Insert the filter (e) into the hose.
☞
The appropriate water connection (f) for the cap nut G 3/8 must be provided by the
customer.
12.6 Screw the hose (d) to the water supply.
12.7 Check the water connection for leaks.

13. Wall-mounted assembly with spiral hose

☞
Important!
• Prior to the assembly process, flush the pipework in accordance with DIN 1988.
• Mount the emergency shower in accordance with EN 15154 Part 2.
13.1 Mounting the wall bracket, see
Caution!
Note the installation position of the filter.
13.2 Insert the filter (b) into the hose (c).
13.3 Connect the eye shower (a) to the hose (c).
13.4 Insert the hose (c) into the wall bracket (e).
13.5 The handle bar (d) must face forwards.
13.6 Fit the connection bracket (f) with the rosette (g) to seal it.
13.7 Screw the hose (c) onto the connection bracket (f), using an open-ended wrench.
13.8 Check the water connection for leaks.
step 11.1 to 11.5.
step 11.1 to 11.5.
- 7 -
Arbeitsschritt 11.8 to 11.8.