Publicité
Les langues disponibles
Les langues disponibles
pRails
Removing the hook-in racks
R a i l s
The hook-in racks are each fixed to the side panels of
the cooking compartment at three points.
Grip the front of the hook-in rack and pull it to the
1.
middle of the cooking compartment.
The front hook of the hook-in rack is released from
the hole.
Fold out the hook-in rack further and pull it from the
2.
rear holes of the side panel.
Hold the catalytic cooking compartment panel in
3.
place.
Remove the hook-in rack from the cooking
4.
compartment.
Inserting the hook-in rack
Hold the catalytic cooking compartment panel in
1.
place.
Insert the hooks of the hook-in rack into the rear
2.
holes in the side panel.
Press the front hook of the hook-in rack into the hole.
3.
qAppliance door
With good care and cleaning, your appliance will retain
A p p l i a n c e d o o r
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the oven door.
Removing the door panels
Open the oven door fully.
1.
Lock both hinges on the left and right using the
2.
locking pin.
The locking pins must be fully inserted into the
Note:
holes in the hinges.
Lift the bottom of the inner panel slightly until the
3.
fastening pins come out of the holder (1).
Carefully lift the top of the inner panel until the
4.
fastening pins come out of the holder (2).
Caution!
When lifting the inner panel, the middle panel may
stick to the inner panel. Ensure that the middle panel
does not fall.
Remove the inner panel.
5.
Clean the panels with glass cleaner and a soft cloth.
:
Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
Rails
en
19
Publicité
