Publicité
Les langues disponibles
Les langues disponibles
4 • Dry ironing
Set the variable steam control to
and set the temperature to suit the type
of material (care points •, ••, •••).
5 • Steam ironing
You can steam iron from temperature setting •• upwards.
Steam function* : The steam level can be set from between •
(minimum steam quantity) and
We recommend setting to maximum steam quantity
the iron is at temperature setting •••.
6 • Burst of steam
Press the burst of steam button
to generate a powerful jet of steam.
Wait a few seconds between each shot
before pressing the button again.
7 • Vertical shot of steam
Hold the iron in the vertical position and press the burst of steam button
8 • Spray
Press the spray button
to dampen stubborn creases.
9 • Anti-Drip system*
This prevents water escaping from the soleplate when the temperature is too low.
10 • Automatic electronic 3-position auto-off*
If, although switched on, the appliance is not moved, it will automatically switch off and the
auto off light will blink after the following intervals:
- After 30 sec., if the iron is left resting on the soleplate or lying on its side.
- After 8 mins., if the iron is left resting on its heel.
To switch the iron back on, move the iron gently.
* depending on model
(from temperature setting •• upwards)
(from temperature setting •• upwards)
TIP Hold the iron 4 to 8 inches away from the garment to avoid bur-
ning delicate fabrics.
to remove creases from suits, jackets, skirts, hanging curtains etc.
IMPORTANT Never direct the steam at persons or animals!
(maximum steam quantity).
6
only when
Publicité
