Télécharger Imprimer la page

MSI K9AGM2 Serie Mode D'emploi page 13

Publicité

Les langues disponibles

Les langues disponibles

Central Processing Unit: CPU
1
The mainboard supports AMD
called Socket AM2 for easy CPU installation. If you do not have the CPU cooler,
consult your dealer before turning on the computer.
For the latest information about CPU, please visit http://www.msi.com.tw/program/prod-
ucts/m ainboard/mbd/pro_m bd_cpu_support.php
Important
Overheating
Overheating will seriously damage the CPU and system. Always make sure the
cooling fan can work properly to protect the CPU from overheating. Make sure
that you apply an even layer of thermal paste (or thermal tape) between the CPU
and the heatsink to enhance heat dissipation.
Replaceing the CPU
While replacing the CPU, always turn off the ATX power supply or unplug the
power supply's power cord from the grounded outlet first to ensure the safety of
CPU.
Overclocking
This mainboard is designed to support overclocking. However, please make
sure your components are able to tolerate such abnormal setting, while doing
overclocking. Any attempt to operate beyond product specifications is not
recommended. We do not guarantee the damages or risks caused by inad-
equate operation or beyond product specifications.
CPU Installation Procedures for Socket AM2
1. Please turn off the power and unplug the power cord be-
fore installing the CPU.
2. Pull the lever sideways away from the socket. Make sure to
raise the lever up to a 90-degree angle.
3. Look for the gold arrow of the CPU. The gold arrow should
point as shown in the picture. The CPU can only fit in the
correct orientation.
4. If the CPU is correctly installed, the pins should be com-
pletely em bedded into the soc ket and c an not be seen. Please note that any
violation of the correct installation procedures may cause perm anent dam ages to
your m ainboard.
5. Press the CPU down firmly into the socket and close the lever. As the CPU is likely to
move while the lever is being closed, always close the lever with your fingers press-
ing tightly on top of the CPU to m ake sure the CPU is properly and com pletely
em bedded into the socket.
®
processor. The mainboard uses a CPU socket
Installation Guide
Correct CPU
placement
Gold arrow
En-5

Publicité

loading

Ce manuel est également adapté pour:

Ms-7327